News
Are you prepared for the New Patient Workflow? That will be enabled for all offices at some point in the future.
You can install 24.8 from our downloads page to get on the workflow, then upgrade to a current version. Please see this article for more information.
We strongly recommend reviewing these changes immediately to understand how they may affect your logic and workflow.
For more details, click here.
- 2025:
- Please see the updates that have been noted on Add New Patient Appointment. You can now schedule for a secondary provider using this procedure.
- The DENTRIXAPI_Get_Last_Error function is a general call that can be used after any function call in the Dentrix API to diagnose issues, such as when a function returns an error or unexpected result. Click here for more information
- Please see the updates that have been noted on Add New Patient Appointment. You can now schedule for a secondary provider using this procedure.
- 2024: Dentrix is releasing every 2 weeks. You can find the releases on the downloads page.
- Nov-2022: Dentrix 22.6 PREVIEW
- Dentrix 22.6 PREVIEW is now available for DDP members for download from Resources > Downloads page on this website.
- 26-Sept-2022: Dentrix 22.5.0 Preview
- Dentrix 22.5.0 is now available for DDP members for download from Resources > Downloads page on this website.
- 23-Aug-2022: Dentrix G7.9
- Dentrix G7.9 is now available for DDP members for download from Resources > Downloads page on this website.
- 9-June-2022: Dentrix G7.8
- Dentrix G7.8 is now available for DDP members for download from Resources > Downloads page on this website.
- 5-May-2022:
- Dentrix has added a gender selection option of “other” to the release of G7.7. DDP partners are highly encouraged to download G7.7 and test their integrations that may be affected by this change.
- Change is for the US and Canadian versions
- Allows third gender value to be added to the American Dental Association (ADA) 2019 claim form
- Updated to show in Questionnaires, reports, treatment plan, patient demographics, letter merge, and all other areas gender is shown.
- DB values are: 1=male, 2=female, 3=unknown (“other” for CX-facing UI)
- Existing integrations from G7.4.5 and earlier do not need to be updated.
- The corresponding Knowledge Base article can be found here https://ddpfeedback.uservoice.com/knowledgebase/articles/1968906.
- Dentrix has added a gender selection option of “other” to the release of G7.7. DDP partners are highly encouraged to download G7.7 and test their integrations that may be affected by this change.
- 4-May-2022: Dentrix G7.6
- Dentrix G7.6 is now available for DDP members for download from Resources > Downloads page on this website.
- 9-April-2021: Dentrix G7.5
- Dentrix G7.5 is now available for DDP members for download from Resources > Downloads page on this website.
- 24-March-2021: Dentrix G7.4.5
- Dentrix G7.4.5 is now available for DDP members for download from Resources > Downloads page on this website.
- 19-August-2019: Dentrix G7.3 Beta 3
- Dentrix G7.3 Beta 3 is now available for DDP members for download from Resources > Downloads page on this website.
- 14-August-2019: Dentrix G7.3 Beta 2
- Dentrix G7.2 Beta 2 is now available for DDP members for download from Resources > Downloads page on this website.
- 29-July-2019: Dentrix G7.2 Update 1
- Dentrix G7.2 Update 2 is now available for DDP members for download from Resources > Downloads page on this website.
- 13-December-2018: Dentrix G7.1 Final
- Dentrix G7.1 Final is now available for DDP members for download from Resources > Downloads page on this website.
- 27-November-2018: Dentrix G7.1 Beta 5
- Dentrix G7.1 Beta 5 is now available for DDP members for download from Resources > Downloads page on this website.
- 01-November-2018: Dentrix G7.1 Beta 4
- Dentrix G7.1 Beta 4 is now available for DDP members for download from Resources > Downloads page on this website.
- 03-August-2018: DDP Digital Certificate Set to Expire
- If you are using the code signing certificate previously provided by Henry Schein One, your application will stop working with the Dentrix API on August 28th, 2018, unless you obtain your own certificate. It is imperative you resolve this situation as soon as possible. For instructions on how to submit your public key, login to ddp.dentrix.com, click on Resources, followed by Knowledge Base, then click here. Get in contact with Matt Meagher for more information.
- 11-July-2018: Dentrix G7.1 Beta 2
- Dentrix G7.1 Beta 2 is now available for DDP members to download from the Resources > Downloads page on this website.
- 23-May-2018: Dentrix G7 Final
- Dentrix G7 Final, which was made available to all customers on G6.2 and higher on 23/05/18, is now available for DDP members to download from Resources > Downloads page on this website.
- 23-February-2018: Dentrix G6.6 R2 Final
- Dentrix G6.6 R2, which was made available to all customers on G6.2 and higher on 23/02/18, is now available for DDP members to download from Resources > Downloads page on this website.
- 8-February-2018: Dentrix G7 Beta 3
- Dentrix G7 Beta 3 is now available for DDP members to download from the Resources > Downloads page on this website.
- 28-November-2017: Dentrix G6.6
- Dentrix G6.6, which was made available to all customers on G6.2 and higher on 11/27/17, is now available for DDP members to download from the Resources > Downloads page on this website.
- 3-March-2017: Dentrix G6.4 Beta 1
- Dentrix G6.4 Beta 1 is now available for DDP members to download from the Resources > Downloads page on this website.
- 3-March-2017: Dentrix G6.3 Final
- Dentrix G6.3 Final is being released to production and is now available for DDP members to download from the Resources > Downloads page on this website.
- 14-November-2016: Dentrix G6.2 Final
- Dentrix G6.2 Final is being released to production and is now available for DDP members to download from the Resources > Downloads page on this website.
- 11-March-2016: Dentrix SDK v2.2
- Dentrix SDK v2.2 is now available for DDP members to download from the Resources > Downloads page on this website. This updated version contains information for all the new Stored Procedures and Views introduced with Dentrix G6, Dentrix G6.1 and Dentrix G6.2.
- 11-March-2016: Dentrix SQL Browser v1.0.1.1
- Dentrix SQL Browser v1.0.1.1 is now available for DDP members to download from the Resources > Downloads page on this website. This updated version is compatible with Dentrix G6.2 Beta and higher.
- 30-November-2015: Dentrix G6.2 Pre-Beta Update (v16.2.193.0)
- Dentrix G6.2 Pre-Beta Update (v16.2.193.0) is now available for DDP members to download from the Resources > Downloads page on this website.
- 3-November-2015: Dentrix G6.1 Final
- Dentrix G6.1 Final is being released to production and is now available for DDP members to download from the Resources > Downloads page on this website.
- 14-September-2015: Dentrix G6.2 Pre-Beta
- Dentrix G6.2 Pre-Beta Install is now available for DDP members to download from the Resources > Downloads page on this website.
- 9-July-2015: Dentrix G6 Final
- Dentrix G6 Final is being released to production and is now available for DDP members to download from the Resources > Downloads page on this website.
- 16-June-2015: Dentrix G6.1 Beta
- Dentrix G6.1 Beta is now available for DDP members to download from the Resources > Downloads page on this website.
- 20-August-2014: Dentrix G6 Beta and Dentrix API 2.1
- Dentrix G6 Beta and the updated documentation for Dentrix API 2.1 are now available for DDP members to download from the Resources > Downloads page on this website.
- 12-December-2013: Dentrix Developer Program Release 2.0
- This update addresses some performance issues in the stored procedures in the API as well as in the Create user application. New views and stored procedures were also added. See the Revision History for the DDP 2.0 release on page 5 of the Dentrix API Developer Guide available for download from the Resource Center.
- 15-February-2013: Dentrix Developer Program Release 1.4.2
- This update addresses many minor issues with the API and stored procedures as well as allowing compatibility with G5 PP1 and Security Hotfixes. This release also allows for running the Create User from a Dentrix Workstation if the end user is running G5 PP1 or higher!
- 1-August-2012:
- We hope you are satisfied with the new changes we have made to the Developer site and the new functions, content and additions we have made that will assist you in expediting the development of your product integration in a time efficient and cost effective manner.
- We have added multiple links to the resources and material available to you. Being this is a new site, we would like to refer to some of the links and resources to familiarize you with the navigation of the Developers site.
- The headline tabs on the top of the site links you to the appropriate silos for easy access to the resources, materials and tools that you will need in your development process